CPP Trowel-Liner Test

The CPP Trowel-Liner test may be taken a maximum of three times. A score of 80% or greater represents a passing score. Upon submission of a test, you will receive an email with your test results.

Company Name

First Name

Last Name

Phone Number

Unique Email Address (Please provide a unique personal or work email address for each registrant. Duplicate email addresses will not be processed.)

1.

CPP Trowel-Liner is ideally suited for water/wastewater repair and lining including:

Tanks (WWTP / WTP)

Lift station and wet well structures

Manholes

Large diameter pipes

All of the above

None of the above

2.

Can CPP Trowel-Liner be sprayed?

Yes, add enough solvent to the product to reach the desired consistency and viscosity to spray.

No, it is specifically formulated for thick hand-applied methods. If the desire is to spray, products from the CPP Sprayliner family should be used.

3.

CPP Trowel-Liner can be applied directly to concrete (DTC)?

True

False

4.

Will CPP Trowel-Liner stop active water leaks?

It will hold back water infiltration only after it cures. However, while a leak is active (under pressure) and the product is soft, it will not hold back active leaks. One of Epoxytec’s Mortartec Hydrxx products or a chemical grout will be needed to stop the active leak before applying CPP Trowel-liner.

CPP will do the trick; there’s no need for chemical grout or any other water stop.

5.

If the surface is highly deteriorated, a resurfacing mortar should be used first before applying CPP Trowel-Liner?

True

False

6.

Epoxytec will issue an extended material defect warranty when CPP Trowel-Liner:

is applied at the recommended thickness

is in service for domestic water/wastewater environments

is installed according to the product data sheet and published system design specifications

is installed by an ECAN contractor

all of the above

7.

When using CPP Trowel-Liner as a liner/coating, what is the minimum thickness that it should be applied, especially if a warranty is to be issued?

As thick or thin as needed

Based on the recommended design thickness published in Epoxytec’s specifications

According to whatever the customer says

8.

CPP is so surface forgiving, that it doesn’t require a dry surface or profile.

True

False

9.

Which of the following statement(s) are true about the term “structural” as described by Epoxytec in reference to CPP:

CPP is designed with enough mechanical strength to hold back low pressure I&I and other low pressure transmission and can be a candidate of design for other below-grade forces when applied at certain specified design thicknesses.

CPP can be formed and cast to create a loading beam to hold up heavy structure.

10.

Which factor(s) should be considered when applying CPP Trowel-Liner?

Surface cleanliness and profile

Surface temperature

Material temperature

All of the above

The CPP Trowel-Liner test may be taken a maximum of three times. A score of 80% or greater represents a passing score. Upon submission of a test, you will receive an email with your test results.

Our Technology

Products

Resources

About Us

Specifications